Reverse Components Black-One D-2 Titanium MTB Stem 1 1/8″ | 31.8/35mm – Silver

 

1 stem for 2 handlebar diameters

The Black One D-2 stem builds on the success of its flagship, the Black One Enduro stem, and offers the possibility of riding both 31.8mm and 35mm diameter handlebars with one stem. The specially designed reducing bush allows the use of 31.8mm handlebars and when removed, you get a 35mm stem. It offers a wide, smooth clamping area, which is ideal for the use of carbon handlebars.

The D-2 Titanium has the same design as the D-2 stem with additional precision machining, a while maintaining strength at full load.

The intelligent and gap-free clamp design in the lower section ensures that there are no pinch points or sharp edges and that the clamping forces are evenly distributed. This ensures safety and optimal technical conditions. This is because most loads and notch effects are always at the bottom of the handlebars. A smooth, gap-free clamping surface extends the life of your handlebars.

The Black One D-2 is ideal for riders who would like to use both handlebar diameters as an option, or who might switch to a new handlebar in the future without needing another stem.

 

Details of the Reverse Components Black-One D-2 Titanium Stem

• length: 35 mm
• Handlebar clamp: Ø 31.8 mm & Ø 35.0 mm
• angle: 8°
• height: 40 mm
• clamping width: 50 mm
• Ø-Head tube: 1 1/8″
• Weight: 127g (+/- 5 % weight tolerance)
• Material: Aluminium 6061 T6

 

Scope of delivery: incl. reducing sleeve, Top Cap with screws and claw